Customization: | Available |
---|---|
Certification: | SASO, RoHS, CB, CCC, ISO9001, CE |
Working Medium: | R410A |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Blueway Air Cooled Water Chiller is specially designed for the need of chilled water in tropical regions of the gulf areas, where the ambient temperature in summer can go above 50ºC, causing the rooftop tank water reach unbearable temperatures.
This chiller system is designed to cool the roof tank water to a temperature ideal for kitchen, laundry and bathroom application. It uses a CFC free, eco-friendly refrigerant which is highly efficient and has no depletion to ozone layer. It adopts world top brand compressor, which is of high efficiency and quiet operation and is tropical for high ambient conditions. Equipped with R410a refrigerant and RS485 interface. Optional built-in water pump & WIFI control function.
The system consists of a refrigerant circuit and a water circuit. The refrigerant circuit is composed of a compressor, a condenser coil, a heat exchanger and a throttling device. The water circuit is composed of a water pump and the same water heat exchanger. The refrigerant absorbs heat from the water passing by the heat exchanger, by which the water temperature is reduced. The whole system is controlled by an intelligent digital controller with a user friendly display.
The evaporator or condenser coil used is of fin and tube type. The fins are hydrophilic treated aluminum fins to resist corrosion, and the copper tubes are inner-grooved type, which increases the heat transfer in the refrigerant side.
The units are supplied with micro processor based digital controller with LCD display. The controller is programmed to provide a maximum protection to the heat pump system and accurate temperature control. The control panel is completely factory wired with all accessories and terminals included.
Domestic ranges are supplied with a built-in circulation pump. Wilo or Shinhoo water pump is optional.
Blueway water chillers adopt aluminum fan blade in tropical regions.
With tropical resistance capacity
High efficiency and energy saving
Quiet operation due to less moving parts
1) Tropical design for a maximum working ambient temperature of 53°C
2) High-efficiency compressor, tropical for high ambient conditions
3) Eco-friendly CFC free refrigerant R410a, without ozone depletion
4) Microprocessor-based digital controller with LCD user interface & RS485 interface
5) Heat exchanger with high thermal efficiency, high working temperature & low maintenance
6) Guaranteed water safety, no potential risk of contamination to potable water
7) Reduce chilled water costs by two-thirds
8) Heavy gauge galvanized steel cabinet with epoxy powder paint for long-lasting outdoor life span
9) Full safety protections incorporated into the system:
─ high pressure and low-pressure protection
─ compressor overload and high discharge temperature protection
─ phase failure protection
─ water flow protection
─ anti-freezing protection
10) The built-in circulation pump is optional
Options: Domestic & Commercial Type
Domestic Air Cooled Water Chiller | |||||||
Model | DWC-18V | DWC-24V | DWC-36V | DWC-48V | DWC-60V | ||
Nominal cooling capacity | ton/h | 1.5 | 2 | 3 | 4 | 5 | |
Power supply | V/Hz/Ph | 220-240/50/1 | 380-415/50/3 | ||||
Cooling (1): A35/24°C W45/25°C |
Cooling capacity | btu/h | 20813 | 28490 | 41626 | 54592 | 66875 |
W/h | 6100 | 8350 | 12200 | 16000 | 19600 | ||
Power consumption | W | 1540 | 2110 | 3110 | 4160 | 5100 | |
EER | - | 3.96 | 3.96 | 3.92 | 3.85 | 3.84 | |
Cooling (2): A46/24°C W45/25°C |
Cooling capacity | btu/h | 17691 | 24217 | 35382 | 46403 | 56844 |
W/h | 5200 | 7200 | 10600 | 14000 | 17500 | ||
Power consumption | W | 1770 | 2440 | 3670 | 4950 | 6040 | |
EER | - | 2.94 | 2.95 | 2.89 | 2.83 | 2.9 | |
Ambient temp. range | °C | 20~53 | |||||
Outlet water temp. range | °C | 15-35 | |||||
Rated water flow rate | m³/h | 0.9 | 1.2 | 1.8 | 2.4 | 3 | |
Controller | - | Micro processor based digital wire controller with LCD display | |||||
Fan | - | Aluminum | |||||
External cabinet | - | Galvanized steel with powder coating | |||||
Compressor | Type | - | Rotary | Scroll | |||
Qty. | Nos. | 1 | |||||
Refrigerant | - | R410a | |||||
Water heat exchanger | - | Brazed plate heat exchanger/tube-in-shell | |||||
Billt-in water pump | - | Wilo/Shinhoo | |||||
Water connection | Inlet&Outlet | inch | 1'' | 1'' | 1'' | 1'' | 1'' |
Noise level | dB(A) | 56 | 57 | 63 | 63 | 63 | |
Net dimension | W*D*H | mm | 660*620*655 | 660*620*655 | 790*750*650 | 790*750*850 | 790*750*850 |
Net weight | kg | 55 | 60 | 87 | 105 | 120 | |
Notes: 1.Conditions of "Cooling (1)": Ambient air temperature DB/WB: 35/24°C, Inlet/Outlet water temperature: W45/25°C; 2.Conditions of "Cooling (2)": Ambient air temperature DB/WB: 46/24°C, Inlet/Outlet water temperature: W45/25°C; Blueway reserves the rights to modify the above specifications without notice for product improvement. Please contact us for updated information. |
Commercial Air Cooled Water Chiller | ||||||
Model | BAWC-8 | BAWC-10 | BAWC-12 | BAWC-18 | ||
Nominal cooling capacity | ton/h | 8 | 10 | 12 | 18 | |
Power Supply | V/Hz/Ph | 380-415/50/3 | ||||
Cooling (1): A35/24°C W45/25°C |
Cooling capacity | btu/h | 107478 | 133068 | 167188 | 249076 |
W/h | 31500 | 39000 | 49000 | 73000 | ||
Power consumption | W | 8200 | 10200 | 12800 | 19000 | |
EER | - | 3.84 | 3.82 | 3.83 | 3.84 | |
Cooling (2): A46/24°C W45/25°C |
Cooling capacity | btu/h | 95536 | 119420 | 146716 | 214956 |
W/h | 28000 | 35000 | 43000 | 63000 | ||
Power consumption | W | 10000 | 12000 | 15100 | 21700 | |
EER | - | 2.8 | 2.92 | 2.85 | 2.9 | |
Ambient temp. range | °C | 20~53 | ||||
Outlet water temp. range | °C | 8-35 | ||||
Rated water flow rate | m³/h | 5 | 6 | 7.4 | 10.8 | |
Controller | - | Micro processor based digital wire controller with LCD display | ||||
Fan | - | Aluminum | ||||
External cabinet | - | Galvanized steel with powder coating | ||||
Compressor | Type | - | Scroll | |||
Qty. | Nos. | 2 | ||||
Refrigerant | - | R410a | ||||
Water heat exchanger | - | Brazed plate heat exchanger | ||||
Water pump (optional) | - | Wilo/Shinhoo | ||||
Water connection | Inlet&Outlet | inch | 1-1/2'' | 1-1/2'' | 1-1/2'' | 2'' |
Noise level | dB(A) | 65 | 65 | 67 | 71 | |
Net dimension (W*D*H) | mm | 1432*742*1064 | 1432*742*1064 | 1432*742*1064 | 2000*950*2050 | |
Net weight | kg | 290 | 300 | 330 | 380 | |
Notes: 1.Conditions of "Cooling (1)": Ambient air temperature DB/WB: 35/24°C, Inlet/Outlet water temperature: W45/25°C; 2.Conditions of "Cooling (2)": Ambient air temperature DB/WB: 46/24°C, Inlet/Outlet water temperature: W45/25°C; Blueway reserves the rights to modify the above specifications without notice for product improvement. Please contact us for updated information. |
1.Blueway has around 30 years of rich HVAC manufacturing experience.
2.Over 1000 original R&D products, Blueway is qualified to be OEM/OBM/ODM.
3.Over 10000 engineering solutions with great success provided by Blueway.
4.Online technical service is available twenty-four hours a day without break.
5.Blueway intelligent control system with precise timing, temperature control & remote monitoring function.
With advanced technology and R&D capacity, Blueway has obtained over more than 20 patents and become one of the leading HVAC manufacturers in China. Meanwhile, 70% of Blueway products have been exported to oversea markets, including Australia, Europe, North America, Middle East, South Africa, South America and obtained worldwide recognition. Additionally, it has over 20 representative offices located in different cities of China, and also has its authorized distributors in Europe, Middle East, North America and South America.
So far, Blueway has already provided over 10000 engineering solutions with great success. What's more, Blueway is also the recommended brand by Hilton Hotel in Chinese market. Blueway will continue its endeavor and commitment to serve its worldwide partners by providing solutions and innovative products of high efficiency.
Q: What's the MOQ?
A: Generally, one unit of sample order is acceptable, but the quotation will be a little higher than the container order.
Q: How to select a suitable model?
A: We can choose a model for you based on the actual project details & related requirements, including the brand of compressor, refrigerant, outlet water temperature, etc.
Q: What's the delivery lead time?
A: Generally, it depends on the PMC & production plan. For standard products, it is about 35 working days. If customized order is about 45 working days.
Q: Refrigerant Type?
A: R410a.
Q: How long is the warranty time?
A: Generally, one year for the whole unit, three years for the compressor.
Q: How to control many units from the same projects?
A: WIFI control or RS485 interface is optional.
Q: How about the after-sales service?
A: Generally, we only provide online technical support. So far, we have authorized distributors & repair centers in Europe, the Middle East, North America & South America for the overseas markets